This machine is suitable to drill metal pipes, at 5 or 6 points, to produce fence poles. Under option is possible to cut them at the same timeor/and to drill them at more points.

The drill motors are hydraulic and they are mounted on a frame which is going up and down driven by an inverter controlled electric motor with speed reducer, equipped with encoder.

The distances between holes and the pole’s length can be adjusted. The holding down of the pipe as well as its ejection is performed by pneumatic device. The whole process (drilling, ejection and sawing, if requested) is performed automatically as soon as the pipe touches the appropriate limit switch. The operation is controlled by PLC and touch screen with possibility of storing in memory various operation programs. On request, a modem is also supplied with the machine for remote controlling.

Technical data


POWER : 5 HP, 380V, 50Hz, 3Φ

DIMENSIONS : 2600 mm x 900mm x 1500 mm

Max. pole’s length : 2500mm (other lengths also possible on request)

No of holes drilled at the same time : up to 5 (on request, more)

Holes' diameter : 8mm (on request, bigger is possible)

By special arrangement possible to drill UNPs, IPEs etc