Suitable to produce chain link fence out of mild steel galvanized or PVC coated wire. Equipped with : Mandrel-less winding for unloading the rolls without stopping the machine. Single worm system for rapid mesh change. Servomotor system allows accurate stopping of the blade at any position, reducing drastically wire entanglements and increasing productivity. Optionally, it can be equipped with a compact winder, or with a border wire equipment to produce fence rolls with selvage wires.
- Model : CFM + NW 4
- Mesh width : 20-103mm
- Wire dia : galvanized 1.5mm-4mm
PVC coated 2mm-5mm
- Width (roll’s height) : 0.8m-6m (depending on the model)
- Power : 23.2 kW (normal) 24.2 kW (compact)
- Capacity : 240 m²/h using 3mm wire diameter, 50 x 50mm mesh and 2m roll height.
Operation parameters such as roll’s height, roll’s length, speed, etc. are easily adjusted by a touch screen within minutes. The operator can also adjust all the timing settings, such as acceleration, deceleration, and motors' activation delays, via the touch screen. In case of trouble or other problems, an optical alarm warns the operator and the problem appears on the screen.
A simple system with a special vice that holds the worm and blade assembly allows the mesh size change in 2 minutes.
Cutting and knuckling motors are equipped with built-in encoders, giving the same precision and life as the main servomotor, ensuring trouble-free machine operation.